In short: Electrical work in Malaysia must be done by a contractor registered with Suruhanjaya Tenaga. Class D is capped at RM100,000 and single phase, Class C at RM500,000, Class B at RM1 million, and Class A above that. Testing above low voltage needs an Electrical Services Contractor. Check registrations and competent persons before you sign.

Southern Johor is wiring up fast. On 13 July 2026, The Star reported that Tenaga Nasional Berhad (TNB) had secured electricity supply agreements for 59 data centre projects with a combined 8.3GW, and that 68% of the secured capacity was in Johor. By 1 October 2026, The Star put TNB’s potential data centre agreements at 13GW as of June 2026, made up of 8.35GW of signed agreements and 4.6GW approved by the Data Centre Task Force, and noted that grid bottlenecks are emerging in Johor.
Individual projects are large. In January 2026, TM Nxera signed a 280MW supply agreement with TNB for an AI-ready data centre campus in the Johor-Singapore Special Economic Zone (JS-SEZ). The zone itself, agreed on 7 January 2025, covers over 3,500 square kilometres of southern Johor and targets eleven sectors including manufacturing, logistics and the digital economy. Cross-border links are close too: on 8 October 2026, Bernama reported that RTS Link passenger service between Johor Bahru and Singapore is expected to start in February 2027, with testing and commissioning running from October to December 2026.
FYAdvisers is a technology consultancy and lead generation firm based in Singapore that now serves Malaysia. It is not an electrical contractor and does not carry out electrical work. We help you define what you need and introduce registered contractors who do the work.
The rules every electrical job in Malaysia follows
Contractor registration with Suruhanjaya Tenaga
The Electricity Regulations 1994, made under the Electricity Supply Act 1990 (Act 447), say in regulation 75 that no one may carry out electrical work without a Certificate of Registration as an Electrical Contractor from Suruhanjaya Tenaga (ST), the Energy Commission. To register, a contractor must have a registered business, employ the required wiremen full time, cover employees under the Employees’ Social Security Act 1969, and own suitable testing equipment (regulation 76). Applications and class changes go through ST’s online system, according to its contractor registration page.
Regulation 78 sets four classes:
| Class | Value of electrical work | Minimum full-time wiremen |
|---|---|---|
| A | Above RM1 million | Three three-phase wiremen, one authorised to test, plus two single-phase wiremen |
| B | Up to RM1 million | Two three-phase wiremen, one authorised to test, plus one single-phase wireman |
| C | Up to RM500,000 | One three-phase wireman authorised to test |
| D | Up to RM100,000 | One single-phase wireman authorised to test; single phase installations only |
Testing and maintenance above low voltage
Low voltage in the regulations means up to 1,000V AC between conductors. Work above that is different. Regulation 71 requires an Electrical Services Contractor registration for maintenance, repair, testing, commissioning and cable fault location, and limits the voltage to the restriction on its Electrical Services Engineer’s certificate. Regulation 13(3) requires any installation above low voltage to be tested by that engineer. For a factory or data centre fed at 11kV, 33kV or 132kV, ask who holds this registration and at what voltage.
Competent persons
ST issues Certificates of Competency to six kinds of competent person. ST Directive No. 12/2026, dated 15 May 2026, sets out what each category may do:
- Wireman (PW1 to PW6). PW1 and PW2 are single phase, PW3 and PW4 three phase; PW2, PW4 and PW6 carry a testing endorsement.
- Chargeman (A0 to A4, B0 to B4). A categories cover low voltage up to 1,000V; B categories cover medium voltage up to 11kV or 33kV.
- Cable Jointer (PK1 to PK6). From low voltage (PK1) up to 275kV (PK6).
- Electrical Supervisor (PE1). Up to 1kV.
- Competent Electrical Engineer (JK1 to JK7) and Electrical Services Engineer (JP1 to JP6). From 11kV up to 500kV.
Breaching the directive is an offence under section 50E of the Act, with a fine of up to RM200,000, up to two years’ jail, or both.
Certificates before TNB connects you
Regulation 11 says wiring an installation needs written approval from the supply licensee, usually TNB, before work starts. Under regulations 12 to 14, a wireman supervises the work and signs a Supervision and Completion Certificate (Form G), a wireman with a testing endorsement signs a Test Certificate (Form H), and TNB will not supply electricity until the owner submits both. Contravening the regulations, where no other offence applies, carries a fine of up to RM5,000, up to a year’s jail, or both (regulation 122).
Why data centres and factories mean HV work
TNB’s Electricity Supply Application Handbook (version 3.1) sets the minimum supply scheme by maximum demand:
| Maximum demand | Supply voltage |
|---|---|
| Over 12kVA to 100kVA (non-domestic) | 400V from the existing LV network |
| Over 100kVA to 1,000kVA | 400V, from a feeder pillar or a new substation |
| 1,000kVA to under 5,000kVA | 11kV |
| 1,000kVA to 10,000kVA | 22kV |
| 5,000kVA to 25,000kVA | 33kV |
| 25,000kVA to under 100,000kVA | 132kV or 275kV |
| 100,000kVA and above | 275kV |
A factory above 1,000kVA takes an 11kV or higher supply with its own switchroom. A data centre of tens or hundreds of megawatts falls in the 132kV or 275kV bands. That means HV switchgear, transformers, cable jointing and protection testing, so the contractor’s Electrical Services Contractor registration, chargemen and cable jointers matter as much as its class.
For any load above 100kVA, the handbook says the electrical consultant applies to TNB after the development order is approved, with a load summary, site plan with substation sites, substation layout, single line diagram and approved building plans. Land for a TNB substation may also be required.
What to specify when you ask for quotes
- Site address, building use and whether it is new build, expansion or fit-out
- Estimated maximum demand in kVA and the supply voltage TNB has offered or is likely to offer
- Drawings: single line diagram, layouts and any consultant’s specification
- Scope split: who supplies switchgear, transformers, generators and UPS, and who installs
- Testing and commissioning required, including HV tests and integrated systems tests
- Programme, including the TNB energisation date you are working to
How pricing usually works
We have not found a published Malaysian price list we could verify, so we do not quote figures. Contractors usually price from drawings and a bill of quantities. The main drivers are:
- Load and voltage. An 11kV or 33kV intake adds switchgear, transformers and HV testing.
- Cable and containment. Sizes, lengths, routes and whether cables are underground.
- Equipment supply. Whether major equipment is free-issued by you or supplied by the contractor.
- Testing and commissioning. HV tests, relay settings and integrated testing take specialist time.
- Programme. Night or weekend shifts for a fast-track energisation date cost more.
Red flags
- A contractor that cannot show its ST registration certificate or quotes for work above its class limit
- A Class D contractor offering three-phase work
- No Electrical Services Contractor, either in-house or named, for HV testing
- Workers who cannot show an ST certificate or competent person card; ST has said the public can ask for the card and scan its QR code
- A quote with no testing, commissioning or certification line items
- Offers to energise before TNB approval or before Forms G and H are signed
Checklist before you sign
- ST Electrical Contractor certificate: class, expiry and company name match the quote
- Electrical Services Contractor registration and the engineer’s voltage limit, if any work is above 1,000V
- Names and certificate categories of the wiremen, chargemen and cable jointers on your job
- CIDB registration grade and electrical specialisations, if the main contract requires them
- Test equipment list and calibration dates
- Who prepares and submits the TNB application and certificates
For suppliers: what buyers will ask you for
Large buyers in Johor prequalify before they ask for prices. Public tenders show the pattern: in September 2024, an MRT Corp registration of interest for general electrical works asked for CIDB specialisations E04, E11 and E17, a valid ST Form Q in Class B, and a valid ST competent person certificate. Expect private developers and M&E main contractors to ask for the same documents.
Your ST class and your payroll
Your class is only as strong as your full-time wiremen. Losing a three-phase wireman with a testing endorsement can take you below the minimum for Class A, B or C under regulation 78. Keep certificates, and the competent person cards issued to staff, current and ready to share. For HV work, buyers will want to see an Electrical Services Engineer with the right JP voltage category, chargemen in the B categories for 11kV or 33kV, and cable jointers in the PK category that matches the cables.
CIDB grade and specialisations
Registration with CIDB places electrical specialisations in codes E01 to E35 under the Mechanical and Electrical (ME) category, and your grade from G1 to G7 caps the value you can tender for. CIDB says specialisations that depend on another agency’s registration lapse if that registration expires, so let your ST registration lapse and your CIDB electrical codes can go with it. Site workers also need CIDB construction personnel registration, which requires a recognised safety course such as SICW. See our CIDB registration guide for grades and fees.
Test equipment
Regulation 76 requires suitable testing equipment as a condition of registration. Buyers will ask for an equipment list with calibration certificates, typically covering insulation resistance testers, earth resistance testers, installation testers and power quality analysers, plus HV test sets and relay test sets if you test above low voltage.
Safety systems
A documented safety management system helps at prequalification. ISO 45001, published in March 2018, is the international standard for occupational health and safety management systems and replaced OHSAS 18001. Have your certificate, scope and expiry date ready if you hold it.
Related Malaysia guides
Setting up a Malaysian entity first? See company incorporation. Bidding for government works? See CIDB registration and ePerolehan registration. Browse all our Malaysia guides.
How FYAdvisers matching works
- Describe your need. Tell us about the site, load, scope and timeline.
- Free concierge consultation. A concierge contacts you to confirm your scope, budget and timing.
- We introduce one to five providers. With your consent, we introduce you to the number of electrical contractors you choose, up to five.
- Meet and decide. Contractors reach out directly with questions and quotes. You choose whether to work with any of them.
Matching is free for you. Providers pay FYAdvisers to receive introductions. FYAdvisers does not carry out electrical work, and we only share your details with your consent.
For suppliers
Supplying electrical works to factories and data centres in Johor?
Apply to receive requests if you hold a current Suruhanjaya Tenaga contractor registration and employ the competent persons your class requires. Buyers will check your class, your CIDB grade and specialisations, your competent persons' certificates and your test equipment before they shortlist you.
Who is buying
- Data centre developers and their main contractors in Johor
- Manufacturers building or expanding plants in the Johor-Singapore Special Economic Zone
- Mechanical and electrical (M&E) main contractors subletting packages
- Commercial landlords and tenants doing office and retail fit-outs
- Facility owners needing maintenance, testing or HV switchgear servicing
What buyers expect you to have
- Insulation resistance testers
- Earth resistance testers
- Multifunction installation testers with RCD and loop impedance testing
- Power quality analysers
- HV cable test sets for medium voltage cable testing
- Protection relay test sets
- Thermal imaging cameras for switchboard inspection
- Cable pulling winches, drum jacks and rollers
- Scissor lifts or mobile elevating work platforms for containment work
Registrations and certifications buyers check
| Certification | Issued by | Why it matters |
|---|---|---|
| Certificate of Registration as an Electrical Contractor (Form Q), Class A to D | Suruhanjaya Tenaga (Energy Commission) | Required under regulation 75 of the Electricity Regulations 1994 to carry out any electrical work; the class sets the value of work you can take on, and tender notices often state a minimum class. |
| Certificate of Registration as an Electrical Services Contractor (Form P) | Suruhanjaya Tenaga (Energy Commission) | Required for maintenance, testing, commissioning and cable fault location, and for testing installations above low voltage, so buyers of HV packages ask for it. |
| Certificate of Competency: Wireman (PW1 to PW6) | Suruhanjaya Tenaga (Energy Commission) | Your contractor class depends on how many full-time single and three phase wiremen you employ, and only a wireman with a testing endorsement can sign the Test Certificate. |
| Certificate of Competency: Chargeman (Penjaga Jentera) A0 to B4 | Suruhanjaya Tenaga (Energy Commission) | Restricts who may operate or control low and medium voltage installations up to 11kV or 33kV; buyers with their own substations ask for the right category. |
| Certificate of Competency: Cable Jointer (PK1 to PK6) | Suruhanjaya Tenaga (Energy Commission) | Covers cable jointing and termination from low voltage up to 275kV, and buyers check the voltage category against the cables in the package. |
| Certificate of Competency: Electrical Services Engineer, Competent Electrical Engineer or Electrical Supervisor | Suruhanjaya Tenaga (Energy Commission) | These competent persons inspect installations, recommend operating staff and, for Electrical Services Engineers, test and calibrate protection relays within their voltage limit. |
| Contractor registration (PPK) with ME category and E specialisations | CIDB Malaysia | CIDB grades G1 to G7 cap the value you can tender for, and electrical specialisations sit in codes E01 to E35 under the Mechanical and Electrical category. |
| ISO 45001:2018 occupational health and safety management system | ISO, certified by accredited certification bodies | An international standard for managing health and safety at work that large developers and main contractors may ask for during prequalification. |
Frequently asked questions
How does matching work?
You describe the job, such as a new factory installation, a data centre package, a fit-out, an HV substation or ongoing maintenance, along with the site, load and timeline. A concierge then contacts you to confirm the details and, with your consent, introduces you to the number you choose (one to five) of electrical contractors that handle that kind of work. They contact you directly, and you decide whether to go ahead with any of them.
Is it free?
Yes. It is free for businesses requesting a match. Providers pay FYAdvisers to receive introductions. FYAdvisers is a technology consultancy and lead generation firm, not an electrical contractor, and does not carry out electrical work itself.
What can each Suruhanjaya Tenaga contractor class do?
Under regulation 78 of the Electricity Regulations 1994, Class D covers work up to RM100,000 and only in single phase installations, Class C up to RM500,000, Class B up to RM1 million, and Class A above RM1 million. Each class must employ a minimum number of full-time wiremen, including one authorised to test installations.
Who can test a high voltage installation?
Regulation 13(3) says an installation operating above low voltage must be tested by an Electrical Services Engineer employed full time by an Electrical Services Contractor, who certifies the Test Certificate. The contractor's voltage limit follows the restriction on that engineer's Certificate of Competency.
How much does an electrical contractor cost in Malaysia?
We have not found a published Malaysian price list we could verify, so we do not quote figures. Contractors usually price from drawings and a bill of quantities, based on the connected load, supply voltage, switchgear and cable sizes, containment, testing and commissioning, and programme. Ask each contractor for an itemised quote on the same scope.
