Cost guides

9 mistakes that inflate office reinstatement costs in Singapore

Cost guidesBy Fiona Wang12 November 20262 min read
Illustration for Singapore B2B provider matching and regulatory benchmarks
Public sources cited 2026 S$ Fee Benchmarks 1–5 Free Quotes
Illustration of an open book whose pages turn into signal waves

In short: Reinstatement cost is mostly set by the lease wording and the condition you took the unit in, not by a generic rate. The usual mistakes are starting without a record of condition, missing landlord approval for the strip-out, and leaving fire-safety works undocumented. Published benchmarks stay on the existing cost page. Checked 12 Nov 2026.

Rates per square foot, where this site publishes them, are on the office reinstatement cost page. This list is the process. It does not replace that table.

Buyer guide illustration for 9 mistakes that inflate office reinstatement costs in Singapore
1Tell us the needScope, budget, timing2Concierge callWe confirm requirements3Registry checksACRA, licences, fit41–5 introductionsCompare quotes free5You decideDecline any; nothing owed
How FYAdvisers matching works
Checklist before you hireEntity is live on ACRA BizFile+ (check the UEN)Relevant licence or registration: ACRA PAC, MAS, IPOS, MOM or Law Society as applicableNamed person who will do the work, and their qualificationWritten scope and fee, with what counts as out-of-scopeProfessional indemnity insurance and engagement letterDeadlines mapped: AGM, Form C, GST, licence renewals
Singapore B2B Vetting & Concierge WorkflowHow we verify and match 1 to 5 providers for your brief
01
Registry & Licence CheckACRA, MAS, CSRO, BCA, MOM & ISO status verified
02
Scope & 2026 Fee AuditItemised S$ benchmarks with hidden traps flagged
03
1 to 5 Vetted QuotesCompare proposals from matched Singapore firms
04
100% Free for BuyersZero obligation; providers fund the service

Nine mistakes

1. Reading the clause in the last month

“Original”, “bare shell”, “as at handover” and “remove the tenant’s fixtures” are different jobs. Get the wording when you sign, using the landlord checklist. If you need the clause explained, that is a commercial lease lawyer, not this page. Law practices pay FYAdvisers nothing.

2. Having no day-one photos

Without a schedule of condition, arguments about damage that was already there are hard. This page does not predict who would win that argument.

3. Treating fit-out drawings as as-builts

If sprinklers, walls or air-conditioning moved, the strip-out follows the unit as it is, not the drawing you approved in month one. Ask for as-builts at handover of the fit-out. The quote exclusions list is where that pack is often missing.

4. Assuming a strip-out needs no approval

Hacking, putting fire systems back, and waste still sit with the landlord, and possibly with SCDF or BCA. The First Schedule can include demolition and reinstatement of non-load-bearing walls and certain false ceilings. A qualified person and the landlord still have to agree that your job is inside those conditions. The map is the permits checklist.

5. Leaving the fire-safety close-out undocumented

If fire systems are reinstated, a fire safety certificate path may apply before the next occupation. Do not guess. Ask the qualified person. The tests are the fire-safety list.

6. Ignoring hours, debris and common areas

The same house rules as a fit-out apply. Private buildings use their own guide. HDB and JTC publish theirs. Do not assume weekend hacking is allowed.

7. Letting two contractors argue over the scope

One set of drawings. One walk-through with the landlord. The fit-out firm and a new reinstatement firm otherwise invoice the overlap twice, or leave a gap neither owns.

8. Having no sign-off, so the deposit stays

Ask what the landlord needs: a joint inspection, keys, and a signed acceptance. Put that in the contract with the reinstatement firm. This page does not state a deposit amount.

9. Comparing quotes on a headline rate only

Use the cost page for benchmarks that are already sourced. Use the exclusions logic for carting, making good, fire reinstatement, floor boxes and after-hours work. A lower rate with those lines missing is not a lower job.

Illustrative only. One lease says “bare” but allowed the tenant to keep the landlord’s raised floor. Another tenant’s day-one photos show the floor was already bare. The scopes differ before anyone prices a square foot. This page does not assign a rate to either.

WhatsApp +65 9071 3976 (chat).

Frequently asked questions

How much does office reinstatement cost?

Published benchmarks are on the office reinstatement cost page. This article does not add a new rate per square foot.

Can I hand back a cosmetic tidy-up if the lease says bare?

Only if the landlord agrees in writing. The lease wording governs. “Bare”, “original” and “as handed over” are not interchangeable.

Do I need the original fit-out contractor?

Nothing in the sources for this pack requires the original firm. The landlord may still impose conditions. Compare scopes, including fire and making-good, before you appoint anyone.

Chat on WhatsAppConcierge · +65 9071 3976
Get Free QuotesWhatsApp Us