In short: Safety signs in Singapore follow the shapes and colours in the Singapore Standard SS 508. Most workplaces need warning, mandatory, prohibition and emergency signs, and construction sites also need hoarding and traffic signs. Exit signs and emergency lighting are part of fire safety works, usually done by a fire protection contractor.
Safety signs are cheap compared with almost any other sign, but they are the ones an inspector, an auditor or an insurer will look for. What matters is that the right sign is in the right place, in a form workers recognise.
The main types
Under the Singapore Standard SS 508 on safety colours and safety signs, the shape and colour tell you the meaning before you read the words:
| Type | Look | Examples |
|---|---|---|
| Prohibition | Red circle with a slash | No smoking, no entry, no naked flames |
| Warning | Yellow triangle with a black border | Forklift traffic, high voltage, wet floor |
| Mandatory | Blue circle | Wear safety helmet, eye protection, safety shoes |
| Safe condition | Green rectangle | First aid, emergency exit, assembly point |
| Fire equipment | Red rectangle or square | Fire extinguisher, hose reel, fire alarm |
Where you need them
- Factories and warehouses. Machine hazards, PPE zones, forklift routes, chemical stores and floor markings.
- Commercial kitchens. Hot surfaces, slippery floors, gas shut-off and fire blanket locations.
- Labs and clinics. Biohazard, radiation and chemical signs.
- Construction sites. PPE at the site entrance, hazard warnings, and traffic signs at site gates. Sites are usually enclosed by hoarding, which often carries printed safety notices.
Materials
- Rigid PVC or foam board for indoor use. Cheap and light.
- Aluminium composite panel for long-life indoor and outdoor use.
- Reflective vinyl on aluminium for traffic and outdoor site signs.
- Photoluminescent vinyl for escape routes, so the sign stays visible in a power cut.
- Floor marking tape and stencils for walkways and forklift lanes.
Fire safety signs
Exit signs and emergency lighting are part of the building’s fire safety system under SCDF’s Fire Code, so they are normally done by a fire protection contractor rather than a sign maker. Extinguisher location signs and evacuation maps can come from either.
Ordering tips
- Walk the site and list each sign with its location and size.
- Use stock signs where the wording is standard.
- For multilingual workforces, ask for English plus the languages your workers read.
- Ask for the material and the expected life outdoors.
- Order spares. Safety signs get damaged on sites.
Get matched
A concierge confirms the list and introduces one to five Singapore sign makers who quote you directly. Free for businesses. FYAdvisers does not make signs.
Frequently asked questions
What standard do safety signs follow in Singapore?
Singapore Standard SS 508 covers safety colours and safety signs: red circles for prohibition, yellow triangles for warnings, blue circles for mandatory actions and green rectangles for safe conditions such as first aid and escape routes. Ask the sign maker to work to SS 508 so symbols match what workers are trained to recognise.
Who installs fire exit signs?
Exit signs and emergency lighting are part of a building's fire safety system under SCDF's Fire Code, so they are normally supplied and installed by a fire protection contractor as part of fire safety works. A sign maker can supply photoluminescent route signs and extinguisher location signs.
What material should safety signs be?
Indoors, rigid PVC or aluminium composite with printed vinyl is common. Outdoors and on sites, aluminium with reflective vinyl lasts longer. Photoluminescent signs that glow in the dark are used along escape routes. Ask for UV-resistant inks if the signs face the sun.
Can I buy standard safety signs instead of custom ones?
Yes. Stock signs such as 'Safety helmet must be worn' or 'No smoking' are cheaper and fast. Custom signs make sense when you need your own wording, multiple languages, site-specific maps or a large quantity in a set layout.
